-40%
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade
BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade

BIQU H2 Direct Extruder Titan BMG Extruder for B1 Ender3 V2/Pro Anet a8 Upgrade

$ 41.87

Availability: 187 in stock
  • Type: Extruder
  • Compatible With: E3D V6 Hotend
  • Weight: 211g (including aluminum heater and fan)
  • Condition: New
  • Max pushing force: 7.5kg (dependent on the filament)
  • Heater Block Type: Original
  • Compatible Model: For Ender 3
  • Module name: BIQU H2 Direct Extruder
  • Material: Stainless Steel
  • Filament Diameter: 1.75MM
  • Advantages: Lightweight,compact and powerful
  • Filament diameter and tolerance: 7.75±0.05mm
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Nominal ateps per mm(16x): 932 steps per mm(further calibration required)
  • Flow rate(based on the current): 600mm³/min(dependent on the filament)
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Model Number: V6 Plated Copper Heater Block
  • Brand: BIQU
  • Recommended motor current: 800mA
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    Introduction:
    Extrusion method: Double gear extrusion
    Maximum printing temperature: 260℃ (
    upgradeable to 500℃
    )
    Weight: 211g (including heating aluminum block, fan)
    Maximum extrusion force: 7.5kg (depending on filaments)
    Extrusion capacity (based on existing): 600mm³/min(depending on filaments)
    Number of pulses: 932steps/mm for stepper motor drive at 16 subdivisions (mircosteps) (further correction is required)
    Recommended motor current: 800mA
    Filaments' diameter and tolerance: 1.75±0.05mm
    This extruder is suitable for most printer. We have the bracket model file of Ender3, and we are perfecting the models of other printer. If you need the model, you can send us a message.